Return To The Factory Settings Reset Param; Calora Tower Gas 25S Ex; Calora Tower Gas 35S Ex - REMEHA CALORA TOWER GAS 15S EX Installation And Service Manual

6. Commissioning
3x
...x
...x
2x
3x
...x
74
1. Press the two keys f simultaneously and then key [+] until the
2. Select the installers menu using the key S . c0de appears
3. Use keys [-] or [+] to input the installer code 0012 .
4. Confirm using key S . p[1 is displayed with 1 flashing.
5. Press the [+] key to go to parameter p[17 .
6. Confirm using key S .
7. Use the [+] key to increase the speed of rotation from 46 to
8. Confirm the value with the S key.
9. Press the > key 2 times to return to the current operating
T001628-A
6.7.4.
1. Press the two keys f simultaneously and then key [+] until the
2. Select the installers menu using the key S . c0de appears
3. Use keys [-] or [+] to input the installer code 0012 .
4. Confirm using key S . p[1 is displayed with 1 flashing.
5. Press the [+] key several times. p[df is displayed with df
6. Press the S key. df[x is displayed with x flashing. This is
7. Enter the value of X shown on the type plate using the [-] or [+]
8. Confirm the value with the S key, df[y is displayed with y
9. Enter the value of Y shown on the type plate using the [-] or [+]
10.Confirm the value with the j key. The factory settings are reset.
11.The display returns to the current operating mode.
T000820-H
CALORA TOWER GAS 15S EX CALORA TOWER GAS 25S EX
symbol ? flashes on the menu bar.
on the display.
50 , for example.
mode.

Return to the factory settings Reset Param

symbol ? flashes on the menu bar.
on the display.
flashing.
the current value of X for dF. Check this against the value of X on
the type plate.
key.
flashing. This is the current value of Y for dU. Check this against
the value of Y on the type plate.
key.

CALORA TOWER GAS 35S EX

22/04/2016 - 300026141-001-07