Carrying Out An Auto-Detect - REMEHA CALORA TOWER GAS 15S EX Installation And Service Manual

CALORA TOWER GAS 15S EX CALORA TOWER GAS 25S EX
CALORA TOWER GAS 35S EX
3x
...x
22/04/2016 - 300026141-001-07
6.7.5.
After removing a control PCB, an auto-detect must be carried out. To
do this, proceed as follows:
1. Press the two keys f simultaneously and then key [+] until the
2. Select the installers menu using the key S . c0de appears
3. Use keys [-] or [+] to input the installer code 0012 .
4. Confirm using key S . p[1 is displayed with 1 flashing.
5. Press the [+] key several times. p[Zd is displayed with Zd
6. Confirm using key S . Auto-detect is carried out.
7. The display returns to the current operating mode.
T000445-B

Carrying out an auto-detect

symbol ? flashes on the menu bar.
on the display.
flashing.
6. Commissioning
75