Installing The Clutch Push Rod; Installing The Gear Oil Drain Plug; Removing The Engine From The Work Stand - KTM 250 EXC EU Repair Manual

18 ENGINE

18.5.29 Installing the clutch push rod

18.5.30 Installing the gear oil drain plug

18.5.31 Removing the engine from the work stand

–
Mount clutch push rod
308115-10
–
Mount and tighten the gear oil drain plug
Guideline
Gear oil drain plug with magnet
–
Activate the kick starter several times to check whether the engine turns over
freely.
308113-01
–
Remove the screw connection from the special tool.
Engine fixing arm (56029002030) (
–
Remove the engine from the work stand.
308114-11
.
1
with the magnet and the new seal ring.
1
M12x1.5
p. 274)
185
20 Nm
(14.8 lbf ft)