Removing The Brake Disc Of The Front Brake; Installing The Brake Disc Of The Front Brake; Rear Wheel; Removing The Rear Wheel - KTM 250 EXC EU Repair Manual

14 WHEELS
14.5.3

Removing the brake disc of the front brake

14.5.4

Installing the brake disc of the front brake

14.6

Rear wheel

14.6.1

Removing the rear wheel

–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Operate the hand brake lever several times until the brake linings are lying correctly
against the brake disc.
–
Remove the motorcycle from the lift stand. (
101386-11
–
Pull the front wheel brake and push down hard on the fork several times to align
the fork legs.
–
Tighten screws
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel. (
Main work
–
Remove screws
303561-10
Main work
–
Clean the contact surface of the brake disc.
–
Position the brake disc with the label facing outward. Mount and tighten screws
Guideline
Screw, front brake disc
303561-10
Finishing work
–
Install the front wheel. (
Preparatory work
–
Raise the motorcycle with the lift stand. (
.
2
.
3
p. 93)
. Take off the brake disc.
1
M6
p. 93)
M24x1.5 45 Nm
(33.2 lbf ft)
p. 10)
M8 15 Nm
(11.1 lbf ft)
p. 10)
Loctite
14 Nm
(10.3 lbf ft)
p. 10)
94
.
1
® 243™