Installing The Spacer; Installing The Clutch Push Rod; Removing The Engine From The Work Stand - KTM 350 EXC-F EU 2012 Repair Manual

30/ENGINE ASSEMBLY

Installing the spacer

21.37

Installing the clutch push rod

21.38

Removing the engine from the work stand

21.39
–
Mount and tighten screw plug
Guideline
Screw plug, oil screen
304921-11
–
Grease the shaft seal ring before mounting.
Long-life grease (
–
Position the O-ring. Mount spacer
304920-10
–
Mount clutch push rod
304919-10
–
Remove the screw connection from the special tool.
Engine fixing arm (77229002000) (
–
Remove the engine from the work stand.
Info
Work with an assistant or a motorized hoist.
304918-10
with the O-ring.
2
M20x1.5
p. 270)
with the bevel facing inward.
1
.
1
p. 276)
176
15 Nm
(11.1 lbf ft)