KTM 250 EXC EU Repair Manual page 19

6 FORK, TRIPLE CLAMP
–
Loosen Preload Adjuster
Pin wrench (T103) (
Info
The Preload Adjuster cannot be taken off yet.
200737-10
–
Take out the fork leg and clamp with the axle clamp.
Info
Use soft jaws.
200690-10
–
Push the outer tube downward.
–
Pull the spring downward. Place the special tool on the hexagonal part.
Open-end wrench (T14032) (
Info
The preload spacers
200738-10
–
Clamp the special tool in the bench vise. Loosen Preload Adjuster
200739-10
–
Remove Preload Adjuster
–
Remove adjustment tube
200740-10
–
Pull the spring downward. Remove the special tool.
–
Remove the spring.
201348-10
.
3
p. 276)
p. 279)
should be above the special tool.
4
with preload spacers
3 4
.
5
.
3
.
17