Checking The Trend Of Measurement Results With Graphs - Omron FQ-CR2 User Manual

6-3 Checking the Trend of Measurement Results with Graphs

Measurement result histories can be checked using the trend monitor and histograms.
Trend Monitor
Changes in the measurement values of the selected inspection item against time can be observed from the
graph. It becomes possible to predict when malfunctions may occur or to analyze the cause of the malfunction
by checking the trends in the measurement values. The most recent 1,000 measurement values are displayed
on the graph.
• [Trend Monitor] Display
Switches the display
to the previous
inspection item
number.
Measurement
values
(Run Mode) − [Select display] − [Trend monitor]
Arranging the Trend Monitor Display
The display range for the vertical axis and display conditions for the horizontal axis can be changed. However,
the display range and the number of data settings are disabled when a display other than the trend monitor is
displayed.
• Disabling Automatic Selection of the Display Range
1 ] − [Auto display] on the right of the trend monitor.
Press [
2
Press [OFF].
• Changing the Display Range of the Vertical Axis
1 ] − [Display range] on the right of the trend monitor.
Press [
2
Set the minimum and maximum values of the measurement values.
• Changing the Number of Values That Are Displayed
1 ] − [Number of data] on the right of the trend monitor.
Press [
2
Select the number of values from 200, 400, and 1,000.
64

Checking the Trend of Measurement Results with Graphs

Changes in the measured value of the selected
inspection item are displayed against time in a graph.
Switches the display to the
next inspection item number.
FQ-CR2 User's Manual