Part Names And Functions - Omron FQ-CR2 User Manual

2-2 Part Names and Functions

FQ Sensor
(6)
(7)
No. Name
(1) Lighting
(2) Camera lens
(3) I/O Cable connector
(4) Ethernet cable connector
(5) Focus adjustment screw
(6) Operation OR
indicators
ETN
ERROR
BUSY
(7) Mounting Bracket
FQ-CR2 User's Manual
(5)
(1)
(2)
(4)
(3)
Description
LEDs for illumination
This lens can be focused.
An I/O Cable is used to connect the Sensor to the power supply and exter-
nal I/O.
An Ethernet cable is used to connect the Sensor to external devices such as
PLCs, the Touch Finder, or computers.
Used to adjust the focus of the image.
Lights orange when the OR output signal turns ON.
Lights orange during Ethernet communications.
Lights red when an error occurs.
9-1 Error Table p. 154.
Lights green when the Sensor is executing a process.
Used to mount the Sensor.
The Mounting Bracket can be attached to the front, left side, right side, or
back of the Sensor.

Part Names and Functions

19