Outputting/Controlling With Ethernet - Omron FQ-CR2 User Manual

8-2 Outputting/Controlling with Ethernet

Data can be input and output to external devices via Ethernet. The two methods are described below.
• No-protocol Data Output
Data that is already specified for output is automatically output from the Sensor to Ethernet when an overall
judgement result is output. Up to 32 data can be output in the specified format (ASCII format or binary format).
• No-protocol Command/Response Method
The external device sends a command to the Sensor and receives a response from the Sensor.
External device
118
Outputting/Controlling with Ethernet
External device
Data
Up to 32 specified data
are automatically output.
Command
Switch the scene number.
Execute one measurement.
Etc.
Response
OK
NG
Etc.
Sensor
Sensor
FQ-CR2 User's Manual