Specifications And Dimensions - Omron FQ-CR2 User Manual

10-3 Specifications and Dimensions

Sensor
Specifications
Item
Model NPN
PNP
Field of view
Installation distance
Minimum resolution
Main functions Inspection items
Number of simulta-
neous measure-
ments
Number of registered
scenes
Image input Image filter
Image elements
Shutter
Processing resolu-
tion
Lighting Lighting method
Lighting color
Data logging Measurement data
Images
Measurement trigger
I/O specifications Input signals
Output signals
Ethernet specifica-
tions
Input specifications
Output specifications
Connection method
170

Specifications and Dimensions

Fixed Mount 2D Code Reader
FQ-CR20@@@@-M
FQ-CR25@@@@-M
Refer to Table 1.
Refer to Table 1.
FQ-CR2@010F-M: 0.040 mm FQ-CR2@050F-M: 0.070 mm
FQ-CR2@100F-M: 0.282 mm FQ-CR2@100N-M: 0.155 mm
2D codes (DataMatrix (EC200), QR codes)
32
32
High dynamic range (HDR), polarizing filter (attachment), Smooth, Dilate, Erosion,
Median
1/3-inch monochromatic CMOS
1/250 to 1/32,258
752 × 480
Pulse
White
In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capac-
ity of an SD card.)
In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity
of an SD card.)
External trigger (single or continuous)
7 signals
• Single measurement input (TRIG)
• Control command input (IN0 to IN5)
3 signals
• Control output (BUSY)
• Overall judgement output (OR)
• Error output (ERROR)
Note: The three output signals can be allocated for the judgements of individual inspec-
tion items.
100Base-TX/10Base-T
Numerical outputs and control commands are supported with no-protocol communica-
tions.
Refer to Table 2.
Special connector cables
Power supply and I/O: 1 cable (FQ-WD@@@)
Touch Finder and computer: 1 cable (FQ-WN@@@)
FQ-CR2 User's Manual