Omron FQ-CR2 User Manual page 53

Detailed Parameters
Each parameter is automatically set by default.
If scanning cannot be performed because the code is different or otherwise, set the detailed parameters
manually and execute teaching.
[Inspect] - [Modify] - [Add item] - [2D-code] - [Details] tab
Detailed Parameter Settings
Parameter
Code type DataMatrix
QR Code
Auto (default)
Auto length OFF
ON (default)
Reverse Normal
Reverse
Auto (default)
Code color Black
White
Auto (default)
Fast mode ON, OFF (default)
Shape Square
(DataMatrix only) Rectangle
Auto (default)
QR Code Model Model 1
(QR Code only) Model 2
Auto (default)
Error Correction Level L (7%)
(QR Code only) M (15%)
Q (25%)
H (30%)
Auto (default)
21 × 21, 25 × 25, 29 × 29,
Cell
33 × 33, 37 × 37, 41 × 41,
(QR Code only)
45 × 45, 49 × 49, 53 × 53,
57 × 57, Auto (default)
Cell Shape: Square
10 × 10, 12 × 12, 14 × 14,
(DataMatrix only)
16 × 16, 18 × 18, 20 × 20,
22 × 22, 24 × 24, 26 × 26,
32 × 32, 36 × 36, 40 × 40,
44 × 44, 48 × 48, 52 × 52,
64 × 64, Auto (default)
Shape: Rectangle
8 × 18, 8 × 32, 12 × 26,
12 × 36, 16 × 36, 16 × 48,
Auto (default)
FQ-CR2 User's Manual
Setting
Sets the type of code to be scanned.
Sets whether the code length is automatically acquired.
Sets normal image or reverse (mirror) image.
Sets the color of the code.
Sets fast mode.
When ON, the scanning time is shorter.
For certain work, the scanning time may be longer when Fast mode is ON.
Please use after performing test measurements and verifying the scanning
speed.
Sets the code shape.
Sets the QR Code model.
Sets the error correction level (ECC level).
(The ECC level of DataMatrix is fixed at 200.)
Sets the number of code cells.
Sets the number of code cells.
Description
Setting 2D Code Inspection Conditions
51