Updating The Software - Omron FQ-CR2 User Manual

10-4 Updating the Software

The most recent version of the software and PC Tool can be downloaded from the following website for
OMRON members. Refer to the Member Registration Sheet that is enclosed with the Sensor.
http://www.omron-cxone.com/vision_sys
After you download the software, use the following procedure to update.
• Updating from the PC Tool
1
Store the update file you obtained in the following directory.
\\....\My Documents\OMRON FQ\SDCard\UPDATE\SENSOR
2
To update the software in the Sensor, press
• Updating from the Touch Finder
1
Place the update file that you obtained directly in the root folder of the SD card.
2
Insert an SD card into the Touch Finder.
3
To update the software in the Sensor, press
4
To update the software in the Touch Finder, press
The software will be updated automatically.
Important
Do not turn OFF the power supply until updating the software has been completed.
The Sensor or Touch Finder may not start normally if power is turned OFF during the update.
180

Updating the Software

(Setup Mode) - [Sensor settings] - [Update].
(Setup Mode) - [Sensor settings] - [Update].
(Setup Mode) - [TF settings] - [Update].
FQ-CR2 User's Manual