Changes The Scene Number - Omron FQ-CR2 User Manual

Change Scene Number
This command changes the scene number to use.
<Command Format>
S C E N
or
S N
Scene number
(2 digits max.)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Scene number
128
Outputting/Controlling with Ethernet
E CR
Delimiter
Scene number
(2 digits max.)
CR
Delimiter
Specifies the scene number (0 to 31) to change to.
or
S
Scene number
(2 digits max.)
CR
Delimiter
FQ-CR2 User's Manual