Trigger Settings - Rigol DS1000CA series User Manual

Trigger Settings

Set up different trigger settings according to different trigger modes. When in the
mode of Edge and Pulse, only Holdoff is adjustable. When source is non-digital
channel and in slope trigger, only trigger coupling, trigger sensitivity and Holdoff can
be set. For video trigger, Sensitivity and Holdoff can be set.
Figure 2-52 Table 2-32 The Trigger Set Up menu (Settings for trigger coupling,
Coupling
Sensitivity
Holdoff
Holdoff
Figure 2-53
Table 2-33 The Trigger Set Up menu (Settings for sensitivity and
Sensitivity
Holdoff
Holdoff
User‟s Guide for DS1000CA Series
trigger sensitivity and holdoff)
Menu Settings
DC
AC
HF Reject
LF Reject
<Sensitivity Setting>
<Holdoff Setting>
Reset
holdoff)
Menu Settings
<Sensitivity Setting>
<Holdoff Setting>
Reset
Comments
Allow all signals pass.
Block DC signals.
Reject high frequency signals.
Reject DC and low frequency
signals.
Set trigger sensitivity and the
range is from 0.10div to
1.00div.
Set time slot before another
trigger event and the range is
from 500ns to 1.50s.
Reset Holdoff time to 500ns.
Comments
Set trigger sensitivity.
Set time slot before another
trigger event.
Reset Holdoff time to 500ns.
RIGOL
2-41