Protection In Accordance With Ul; Protection With Mccb„Nkjh2; Protection With Mccb In Accordance With Ul 489 (Ul: Divq); Maintenance - KEB Combivert F5 series Instruction Manual

Power circuit 0.37...37 kw
Hide thumbs Also See for Combivert F5 series:
Table of Contents

Advertisement

Annex
A.4

Protection in accordance with UL

A.4.1 Protection with MCCB
„NKJH2"
Manufacturer
Siemens
ABB Stotz
Rockwell / Allen Bradley E 205542
Moeller
Where x or xx means that here current rating or letter for current rating is given.
A.4.2 Protection with MCCB in accordance with UL 489 (UL: DIVQ)
Authorized manufacturers of MCCB´s with the specified rated currents of the MCCB´s described in chapter 2.2
and 2.3:
Manufacturer
Siemens
1)
zzzz: for options (see Siemens catalog)
A.5

Maintenance

All work may only be done by qualified personnel. The security must be ensured as follows:
Disconnect power supply at MCCB
Secure against restarting
Await discharge time of capacitors (if necessary controlling by measurement at „+PA" and „-", respectively
"++" and „--")
Ensure loss of voltage by measurement
In order to avoid premature ageing and avoidable malfunctions, the measures mentioned below must be carried
out in the appropriate cycle.
Cycle
Constant
Monthly
GB - 28
UL-File
E 156943
E 195536
E 123500
UL-File
Type
VL 400 UL, JG-Frame
E10848
VL 400X UL, LG-Frame
Function
Pay attention to unusual noises of the motor (e.g. vibrations) as well as of the frequency inverter
(e.g. fan).
Pay attention to unusual smells of the motor or frequency inverter (e.g. evaporation of capacitor
electrolyte, braise of the motor winding)
Check unit for loose screws and plugs and if necessary tighten up.
Clean frequency inverter from dirt and dust deposits. Pay attention especially to cooling fins and
protective grid of the fans.
Examine and clean extracted air filter and cooling air filter of the control cabinet.
Examine function of the fans of the KEB COMBIVERT. The fans must be replaced in case of
audible vibrations or squeak.
Make a visual leak test of the cooling circuit for water-cooled inverters.
Type
3 RV 1021 - 1xA10
3 RV 1031 - 4xA10
MS 325 - xx
MS 450 - xx
140M-C2E-Bxx or Cxx
140M-F8E-Cxx
PKZM0 - xx E (only up to 25 A)
required mains terminal
3RV1928-1H
----
S3-M3
----
----
----
BK25/3 - PKZ0-E
Siemens part number
3VL41 40-xKE30-zzzz
1)
3VL45 60-xKE30-zzzz
1)

Advertisement

Table of Contents
loading

Table of Contents