KEB Combivert F5 series Instruction Manual page 26

Connection Power Unit
External
temperature monitoring
Do not lay connection cable
(also shielded) together
with control cable !
In the motor cable, only per-
mitted with double shielded
motor cable !
Braking resistor
GB - 26
The function must be activated via the software of the control card (CP.28/Pn.12) in order
that an evaluation occurs at F5-B/C/G.
T1
T2
F5-E/H/M/S:
Bridge, if no monitoring is
done
When using a braking resistor absolutely observe the safety and connecting-up instruc-
tions from the instruction manual „braking resistor".
T1
T2
Thermostat relay
(NC contact)
T1
T2
Temperature sensor (PTC)
Response resistance
1650 Ω...4 kΩ
Resetting resistance
750 Ω...1650 Ω
(according to
DIN EN 60947-8)