Siemens SIMATIC Box PC 620 Manual page 4

Preface
Information Classification
The following publication is enclosed with your SIMATIC Box PC 620 which
enables you to carry out initial installation and commissioning:
S The operating manual of the SIMATIC Box PC 620 with the applicable
technical data and software.
Please refer to the associated manuals for further directions for handling the soft-
ware.
Pointers through the Manual
The manual contains in the Chapters 1 to 4 the most important instructions for
starting up and using the programming device of the SIMATIC BOX PC 620.
Chapters 5 to 8 are reference sections you will require only in special cases.
Installation
Before you use the SIMATIC BOX PC 620 for the first time, read Chapter 2 about
the possibilities for assembly and installation on the SIMATIC Box PC 620's
components and functionality.
Start up
Chapter 4 describes the basics steps necessary for starting up the
SIMATIC BOX PC 620.
Expansion
Chapter 4 describes how to expand your SIMATIC BOX PC 620 (e.g. installation of
memory expansions). Please observe the safety notes.
Configuration
Modifications to the system hardware may make it necessary for you to adapt the
original hardware configuration. Chapter 6 tells how to proceed in this case.
Error/Fault Dignostics
Chapter 7 will tell you how to deal with simple faults that you can diagnose and, in
some cases, eliminate yourself.
Reference Data
Chapter 8 contains hardware addresses, interrupt assignments and information on
connecting cables.
ESD instructions
The instructions for handling electrostatic sensitive devices are of particular impor-
tance for service and maintenance engineers who install expansions or carry out
error analysis with the SIMATIC Box PC 620.
Glossary
The glossary explains important terms.
iv
SIMATIC Box PC 620 Manual
C79000-G7076-C639-04