Cd-Rom Drive - Siemens SIMATIC Box PC 620 Manual

Hardware Information
8.9

CD-ROM Drive

Depending on the device equipment, a CD-ROM drive is installed in the
SIMATIC Box PC 620. The fitting depth of the PC is increased by 20 mm as a
result. The CD-ROM drive allows you to read CDs.
Opening the Drawer
By briefly pressing the eject button, the drawer springs out slightly. Now pull the
drawer out until it clicks into position.
Inserting / Removing CDs
Now insert the CD in the drawer with the labeling face up, and press it firmly down
into the center of the turntable. To remove the CD, hold it by the edges and pull
upwards.
Caution
!
To avoid too much pressure on the open drawer, always hold the drawer at the
front with one hand when inserting or removing a CD.
Closing the Drawer
Push in the drawer until it closes completely. Do not press the eject button.
Note
The EJECT function offered by various applications for opening the CD-ROM
drawer does not work with this drive.
After the drawer has been closed, the CD is tested and the access display light on
the drive starts to flash:
– If the display flashes continually, the CD is faulty but can still be read,
– If the display flashes several times and then remains lit, the CD you have
inserted is defective and cannot be read.
– The access indicator light is normally lit when the CD is being read.
8-44
SIMATIC Box PC 620 Manual
C79000-G7076-C639-04