Unpacking And Checking The Scope Of Delivery - Siemens SIMATIC Box PC 620 Manual

Commissioning the SIMATIC Box PC 620
2.1

Unpacking and Checking the Scope of Delivery

Unpacking the SIMATIC Box PC 620
Unpack your SIMATIC Box PC 620 programming device as follows:
1. Remove the packing.
2. Do not throw the original packing away. Keep it in case you have to transport
the unit again sometime in the future.
3. Please keep the documentation in a safe place. It is required during the initial
start up (see Section 5.2) and is part of the device.
4. Check the packing and its contents for any shipping or transport damage.
5. Check with the packing list to make sure no components are missing. Also
check the accessory parts, which you can order separately.
6. Please inform your local dealer of any shipping or transport damages and of
outstanding items indicated on the packing list.
Recording the Serial Number
Enter the serial no. of your SIMATIC Box PC 620 in the table. It is on the name
plate above the floppy disk drive.
If a programming device is stolen and subsequently submitted for repair, the repair
center will be able to identify it by the serial number (F-No).
F-No.
MLFB-No.
2-2
SIMATIC Box PC 620 Manual
C79000-G7076-C639-04