Setting Up and Operating the SIMATIC Box PC 620
Connecting the SIMATIC Box PC 620 to the Power Supply
Connecting to the Power Supply
You can operate the SIMATIC Box PC 620 on 120 V and 230 V power systems
using the external power supply unit. The voltage is selected automatically.
1. Plug the power supply cable supplied into the inlet connector for non-heating
2. Connect the power cable to a socket outlet with a grounded protective
3. The device is now ready for power supply operation and the battery will be
charged if required.
Connection to power supply
Inlet connector for non-
Figure 4-1 Connection to Power Supply (Inlet Connector for Non-Heating Appliances)
SIMATIC Box PC 620 Manual