Siemens SIMATIC Box PC 620 Manual page 34

Welcome to the SIMATIC Box PC 620
Note
Peak currents of 650 mA at 5 V based on 3 s are permitted!
Examples of PCMCIA cards connected to PC card interface for
Installing PC Cards
Note the following when installing these cards:
Note
Depending on the configuration of the SIMATIC Box PC 620, there may not be any
free interrupts available for operating PC Cards. You have to reserve the necessary
PC card interrupts in the BIOPS setup menu as follows:
Set the necessary interrupt via Advanced > PCI-Configuration >
PCI/PNP ISA IRQ Resource Exclusion to "reserved" (default: available).
3-8
Hard Disk
(Maxtor MXL-131-III) . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Fax/modem . . . . . . . . . . . . . . . .
(Dr. Neuhaus) . . . . . . . . . . . . . .
Ethernet
(XIRCOM) . . . . . . . . . . . . . . . . .
330 mA read/write
640 mA spin up 2 s
110 mA idle
60 mA idle
140 mA transfer
150 mA
SIMATIC Box PC 620 Manual
C79000-G7076-C639-04