Range of Application
The SIMATIC Box PC 620 is a basic device for high performance automation
solutions. It meets the highest requirements through:
S compliance with the requirements for a fire enclosure to EN60950/UL508
(device with AC power supply), i.e. it may be used without an additional fire
S extremely compact dimensions,
S suitability for continuous 24 hour operation,
S serviceability in a wide ambient temperature range,
S high robustness,
S a design which is extremely easy to service and maintain.
The SIMATIC Box PC 620 can be installed in all the usual positions.
There are anchorage points on both of the long sides for securing the box.
Mounting brackets can be screwed on to these anchorage points.
The SIMATIC Box PC 620 is equipped with software that allows it to be used
universally. The following software packages are available:
S Operating system Windows NT Server or Workstation;
S Operating system Windows 98
S Operating system Windows 2000
Due to its hardware, the SIMATIC Box PC 620 additionally allows the use of:
S SIMATIC supplementary software
S Software from the entire world of automation
S Software from the PC world
Further Areas of Application:
The SIMATIC Box PC 620 can also be used in other areas of automation
(SIMATIC HMI; TELEPERM; SINUMERIK; SIROTEC etc.).
SIMATIC Box PC 620 Manual