Download  Print this page

Advertisement

Configuring the SIMATIC Box PC 620
6.1.3

The Security Menu

Summary
You can only edit the fields enclosed in square brackets. Two passwords are
assigned to protect your PC from unauthorized use. You can use the supervisor
password to prevent use of diskettes for the normal user and to limit use of the
hard disk.
Main
Supervisor Password is
User Password is
Set Supervisor Password
Set User Password
Password on boot:
Fixed disk boot sector:
Diskette access:
F1 Help
ESC
Exit
Figure 6-16
User Password
is
Set Supervisor
Password
Set User
Password
Password on
boot
Fixed disk boot
Sector
6-22
PhoenixBIOS Setup-Utility
Advanced
Security
Power
Disabled
Disabled
[Enter ]
[Enter]
[Disabled]
[Normal]
[Supervisor]
Select Item
+ / –
Change Values
Select Menu
Enter Select
"Security" Menu
Disabled
Password is active. BIOS Setup cannot be opened until
the password has been entered.
Enabled
Certain Setup fields are thus configurable by the user,
including the user password.
The field resets automatically from [Disabled] to [Enabled] when the
password is entered.
This field opens the dialog box for entering a password. Once it has been
entered, the supervisor password can be changed or deleted by
pressing "Return" and thus deactivated.
This field opens the dialog box for entering a password. Once it has been
entered correctly, the user password can be changed or deleted by
pressing "Return" and thus deactivated.
[Disabled]
No password required for system boot.
[Enabled]
Supervisor or user password must be entered for system
boot.
[Normal]
All types of hard-disk access are permitted.
[Write protect] No operating system can be installed.
This is a way of protecting against boot viruses.
Boot Sequence
Version
Exit
Item Specific Help
Supervisor Password controls
access to the setup utiliy
F9
Setup Defaults
Sub-Menu
F10
Save and Exit
SIMATIC Box PC 620 Manual
C79000-G7076-C639-04

Advertisement

   Also See for Siemens SIMATIC Box PC 620

Comments to this Manuals

Symbols: 0
Latest comments: