Default Setup Settings - Siemens SIMATIC Box PC 620 Manual

Configuring the SIMATIC Box PC 620
6.1.8

Default Setup Settings

Documenting Your Device Configuration
If you have made any modifications to the default Setup settings, you can enter
them in the following table. You can then refer to these entries if you need to make
any hardware modifications later.
Note
Print the following table out and keep the pages in a safe place once you have
filled in your entries.
Systemparameter
Main
System Time
System Date
Diskette A
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Memory Cache
Boot Options
Quick Boot Mode
SETUP prompt
POST Errors
Floppy check
Summary screen
Keyboard Features
Num Lock
Key Click
Keyboard auto-repeat rate:
Keyboard auto-repeat delay
Hardware Options
PCI-MPI/DP:
On Board Ethernet
Ethernet Adress
Cardbus/PCMCIA Slot
SafeCard Functions
Legacy USB Suport
CRT/LCD selection
6-30
Default Settings
hh:mm:ss
MM/TT/JJJJ
1,44 MB, 3 1/2" / bei LS 120:
Disabled
C: 4326 MB
None
none
None
Write back
Enabled
Enabled
Enabled
Disabled
Enabled
On
Disabled
30/s
1/2s
Enabled
Enabled
08000624xxxx
Enabled
Enabled
Disabled
SIMULTAN
YourEntries
SIMATIC Box PC 620 Manual
C79000-G7076-C639-04