Figure 3-7 CD-ROM Front
Risk of data loss and damage to the drive!
CD-ROM drives are sensitive to vibrations and shock. Any vibrations occuring
during operation can lead to damage to the drive or CD. You can find the
permissible values in the technical data in Chapter 7 of the operating manual.
The procedure described below can used to remove a disc from the CD ROM rea-
der if the Open/Close button is disabled by software or a power failure occurs. In
this case the CD tray cannot be opened automatically.
1. Turn off the power to the CD ROM reader (switch off your device if necessary).
2. Insert a steel rod or a stiff paper clip (with a maximum diameter of 1.3 mm and a
mimimum of 55mm) into the emergency eject hole at the front of the drive and push
lightly. The CD tray is ejected by about 10 mm. Pull it all the way open by hand and
lift the disc out carefully.
Figure 3-8 Emergency Ejection
SIMATIC Box PC 620 Manual
Welcome to the SIMATIC Box PC 620
at least 55 mm (2.1654") in length