Connecting To A Wired Lan - Canon i-SENSYS LBP151dw User Manual

Connecting to a Wired LAN

Connect the machine to a computer via a router. Use a LAN cable to connect the machine to the router.
● The machine does not come with a router or LAN cable. Have them ready as necessary. Use a Category 5 or
higher twisted pair cable for the LAN.
● Make sure that there are ports available on the router to connect the machine and the computer.
● The machine supports 10BASE-T and 100BASE-TX connections. If you want to connect the machine to a
100BASE-TX Ethernet network, all the devices connected to the LAN (router, LAN cable, and network board
for computer) must support 100BASE-TX.
● Wired LAN and wireless LAN cannot be used at the same time.
● If you are using the machine in your office, consult your network administrator.
1
Connect a LAN cable.
● Connect the machine to a router by using a LAN cable.
● Push the connector in until it clicks into the port.
2
Check that the LNK indicator (
Network
) is lit.
92
0YFA-022