When the LNK indicator does not light up
3
Wait approximately 2 minutes.
●
The IP address is automatically set during this time.
●
If the IP address is not set automatically
●
You can also set the IP address manually.
After switching the connection method from wireless LAN to wired LAN
You need to uninstall the currently installed printer driver, configure the wired LAN connection, and then
reinstall the printer driver in accordance with the Printer Driver Installation Guide. When configuring the wired
LAN connection, select [Custom Setup] for the configuration method.
LINKS
Connecting to a Network(P. 90)
Network
Problems with the Wireless/Wired LAN Connection(P. 225)
Problems with the Wireless/Wired LAN Connection(P. 225)
Setting IP Addresses(P. 97)
93