System Management - Canon i-SENSYS LBP151dw User Manual

[Point Size]
Set the font size in points, adjustable in 0.25 increments. You can specify this setting only when a proportionally-
spaced scalable font is selected in [Font Number].
[Pitch]
Set the font pitch, or cpi (characters per inch), adjustable in 0.01 increments. You can specify this setting only
when a fixed-pitch scalable font or a bitmap font is selected in [Font Number].
[Form Lines]
Set the number of lines printed on one page from 5 to 128. This setting is automatically changed according to
the settings specified in [Default Paper Size] and [Orientation].
[Character Code]
Select the character code that is most suited for the computer you send print data from. The specified setting is
ignored when the character code is controlled by the font specified in [Font Number].
[Set Custom Paper]
Select whether to set a custom paper size. Select [On] to set the dimensions of the paper in [X dimension] and [Y
dimension].
[Unit of Measure]
Select the unit of measurement to use to set a custom paper size.
[X dimension]
Specify the horizontal dimension (short edge) of the custom paper.
[Y dimension]
Specify the vertical dimension (long edge) of the custom paper.
[Append CR to LF]
Select whether to append a carriage return (CR) when the machine receives a line feed code (LF). If [Yes] is
selected, the print position moves to the beginning of the next line when the machine receives an LF code. If
[No] is selected, the print position moves to the next line, just under the received LF code.
[Enlarge A4 Print Width]
Select whether to expand the width of the printable area of A4 size paper in portrait orientation to that of LTR
size.
[Halftones]
You can select the printing method to reproduce halftones (the intermediate range between the lighter and
darker areas of an image) for optimal image quality. For each document, you can make settings by type of
image.

System Management

You can specify that a PIN (system manager password) is required when logging in to the Remote UI in System
Manager Mode, and you can register information about the system manager, such as name and contact information.
You can also register a name to identify this machine, and register its location.
System Manager Information
Set System Manager PIN
Off
On
Set/Change PIN
Off
On
PIN/Confirm
System Manager Name
Contact Information
E-Mail Address
Using the Remote UI
197