Clearing Paper Jams - Canon i-SENSYS LBP151dw User Manual

Clearing Paper Jams

If paper jams, the (Alarm) indicator flashes, and the message <Paper Jam inside Printer> and paper jam locations
are displayed in the Printer Status Window. Clear the jams in the displayed order of jam locations using the procedures
described in the sections referred to below. Before starting, carefully read the safety instructions in
Safety Instructions(P. 2) .
● <Inside the rear cover>
Paper Jams Inside the Rear Cover(P. 214)
● <Inside the top cover>
Paper Jams Inside the Top Cover(P. 214)
When removing the jammed paper, do not turn OFF the machine
Turning OFF the machine deletes the data that is being printed.
If paper tears
Remove all the paper fragments to prevent them from becoming jammed.
If paper jams repeatedly
● Tap the paper stack on a flat surface to even the edges of the paper before loading it into the machine.
● Check that the paper is appropriate for the machine.
● Check that no jammed paper fragments remain in the machine.
● If you use paper with a coarse surface, set [Paper Type] to [Bond 1 [60-90 g/m2]], [Bond 2 [91-120 g/m2]] or
[Bond 3 [121-163 g/m2]].
Do not forcibly remove jammed paper from the machine
Forcibly removing the paper may damage parts in the machine. If you are not able to remove the paper, contact
your local authorized Canon dealer or the Canon help line.
If you click [Troubleshooting Details], you can display the same troubleshooting methods that are described in
this manual.
Troubleshooting
Basic Printing Operations(P. 45)
213
Paper(P. 290)
When a Problem Cannot Be Solved(P. 244)
0YFA-03U
Important