3
Select the [Use TLS] check box and click [OK].
Starting the Remote UI with TLS
●
If you try to start the Remote UI when TLS is enabled, a security alert may be displayed regarding the
security certificate. In this case, check that the correct URL is entered in the address field, and then proceed
to display the Remote UI screen.
LINKS
Generating Key Pairs(P. 160)
Using CA-issued Key Pairs and Digital Certificates(P. 167)
Configuring IEEE 802.1X Authentication(P. 154)
Monitoring and Controlling the Machine with SNMP(P. 128)
Security
Starting the Remote UI(P. 175)
153