Canon i-SENSYS LBP151dw User Manual page 132

5
Select the [Use SNTP] check box and enter the required information.
[Use SNTP]
Select the check box to use SNTP for synchronization. Clear the check box if you do not want to use this
function.
[NTP Server Name]
Enter the IP address of the NTP or SNTP server. If a DNS server is available on the network, you can enter
"<host name>.<domain name>" (FQDN) of up to 255 alphanumeric characters instead (example:
"ntp.example.com").
[Polling Interval]
Enter an interval from 1 to 48 hours to specify how often to poll the time server.
6
Click [OK].
Testing communication with the NTP/SNTP server
You can test whether the machine is communicating with the registered time server. Click [Settings/
Registration] [Network Settings]
Server]. If a proper connection has been established, the result is displayed as shown below. (Note that this
operation only checks the connection. It does not adjust the system clock.)
Network
[TCP/IP Settings] to display [SNTP Settings], and then click [Check NTP
127