Canon i-SENSYS LBP151dw User Manual page 122

5
Clear the [Auto Detect] check box, and then configure the Ethernet settings.
[Auto Detect]
Clear the check box to configure the Ethernet settings manually. Select the check box to detect the Ethernet
settings automatically.
[Communication Mode]
Select the Ethernet communication mode.
[Half Duplex]
[Full Duplex]
[Ethernet Type]
Select [10BASE-T] or [100BASE-TX] as the Ethernet type.
6
Click [OK].
LINKS
Changing the Maximum Transmission Unit(P. 118)
Setting a Wait Time for Connecting to a Network(P. 120)
Network
Alternately sends and receives communication data. Select this when the machine is
connected to a networking device using half duplex.
Simultaneously sends and receives communication data. Use this setting for most
environments.
117