Setting Ipv6 Addresses - Canon i-SENSYS LBP151dw User Manual

Setting IPv6 Addresses

Type
Link-local address
Manual address
Stateless address
Stateful address
1
Start the Remote UI and log on in System Manager Mode.
UI(P. 175)
2
Click [Settings/Registration].
3
Click [Network Settings]
Network
Use the Remote UI to set IPv6 addresses. Before setting IPv6 addresses, make sure
that the IPv4 address has been set correctly (
Settings(P. 104) ). You can register up to nine of the following IPv6 addresses.
Maximum
number
available
1 An address that is valid only within a subnet or link and cannot be used to
communicate with devices beyond a router. A link-local address is set
automatically when the IPv6 function of the machine is enabled.
1 An address that is entered manually. Specify the prefix length and default router
address.
6 An address that is generated automatically using the MAC address of the machine
and a network prefix that is advertised by the router. Stateless addresses are
discarded when the machine is restarted (or turned ON).
1 An address obtained from a DHCP server using DHCPv6.
[TCP/IP Settings].
Description
101
Viewing Network
Starting the Remote
0YFA-026