Download  Print this page

Connecting To A Wireless Lan - Canon i-SENSYS LBP151dw User Manual

Hide thumbs


Connecting to a Wireless LAN

Wireless routers (or access points) connect the machine to a computer via radio waves. If your wireless router is
equipped with Wi-Fi Protected Setup (WPS), you can configure your network with a simple button push. If your
networking devices do not support automatic configuration, or if you want to specify authentication and encryption
settings in detail, you need to set up the connection manually. To make wireless settings for this machine, use the
MF/LBP Network Setup Tool from your computer. Make sure that your computer is correctly connected to the network.
Log on as an administrator
To perform the following procedure, log on to your computer with an administrator account.
Risk of information leak
Use wireless LAN connection at your own discretion and at your own risk. If the machine is connected to an
unsecured network, your personal information might be leaked to a third party because radio waves used in
wireless communication can go anywhere nearby, even beyond walls.
Wireless LAN security standards
This machine supports the following wireless LAN security standards. For the wireless security compatibility of
your wireless router, see the instruction manual or contact the manufacturer.
128 (104)/64 (40) bit WEP
The machine does not come with a wireless router. Have the router ready as necessary.
The wireless router must conform to the IEEE 802.11b/g/n standards and be able to communicate in the 2.4
GHz band. For more information, see the instruction manual for your wireless router or contact the
Wired LAN and wireless LAN cannot be used at the same time. When using a wireless LAN connection, do
not connect a LAN cable to the machine. Doing so may cause a malfunction.
If you are using the machine in your office, consult your network administrator.
Insert the supplied DVD-ROM into the drive on the computer.
Click [Start Software Programs].


Table of Contents


Comments to this Manuals

Symbols: 0
Latest comments: