Table of Contents
Advertisement
Do not install in the following locations
Doing so may result in damage to the machine.
●
A location subject to dramatic changes in temperature or
humidity
●
A location near equipment that generates magnetic or
electromagnetic waves
●
A laboratory or location where chemical reactions occur
●
A location exposed to corrosive or toxic gases
●
A location that may warp from the weight of the machine or where the machine is liable to sink (a carpet,
etc.)
Avoid poorly ventilated locations
This machine generates a slight amount of ozone and other emissions during normal use. These emissions are
not harmful to health. However, they may be noticeable during extended use or long production runs in poorly
ventilated rooms. To maintain a comfortable working environment, it is recommended that the room where the
machine operates be appropriately ventilated. Also avoid locations where people would be exposed to
emissions from the machine.
Do not install in a location where condensation occurs
Water droplets (condensation) may form inside the machine when the room where the machine is installed is
heated rapidly, and when the machine is moved from a cool or dry location to a hot or humid location. Using
the machine under these conditions may result in paper jams, poor print quality, or damage to the machine. Let
the machine adjust to the ambient temperature and humidity for at least 2 hours before use.
When using wireless LAN
●
Install the machine at a distance of 50 m or less from the wireless LAN router.
●
As far as possible, install in a location where communication is not blocked by intervening objects. The signal
may be degraded when passing through walls or floors.
●
Keep the machine as far as possible from digital cordless phones, microwave ovens, or other equipment that
emits radio waves.
In altitudes of 3,000 m or above sea level
Machines with a hard disk may not operate properly when used at high altitudes of about 3,000 meters above
sea level, or higher.
Important Safety Instructions
4
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
