Printing Results Are Not Satisfactory - Canon i-SENSYS LBP151dw User Manual

Printing Results Are Not Satisfactory

Grime inside the machine may affect printing results. First try cleaning the machine.
Smudge Marks Appear on the Bottom Edge of Printouts
Did you print data without margins, all the way to the edge of the page?
● This symptom occurs if a margin is set to none in the printer driver. The range that can be printed on this
machine is the range inside a 5 mm margin around the edge of the paper or a 10 mm margin around the
edge of envelopes. Make sure to have margins around the document to print.
[Finishing] tab
Streaks Appear on Printouts
Are you using appropriate paper?
● Check the usable paper types, and replace with appropriate paper.
Paper(P. 290)
● In the Printer Status Window, change the setting of [Special Print Adjustment]. The improvement effect is
weakest for [Mode 1] and strongest for [Mode 4]. Try the adjustment starting with [Mode 1].
Displaying the Printer Status Window(P. 23)
[Options] [Device Settings]
● In the Printer Status Window, enable [Use Special Print Adjustment D].
Displaying the Printer Status Window(P. 23)
[Options] [Device Settings]
D] check box
Troubleshooting
[Advanced Settings] [Expand Print Region and Print]
[Assisting Print Settings]
[Assisting Print Settings]
[Special Print Adjustment]
Select the [Use Special Print Adjustment
233
0YFA-042
Cleaning the Machine(P. 248)
[Off]
Select mode