Canon i-SENSYS LBP151dw User Manual page 226

● This machine cannot print the data. Click
Network Communication Error
The machine is not connected via the network.
● Make the proper network connection between your computer and the machine.
Connecting to a Wired LAN(P. 92)
Connecting to a Wireless LAN(P. 94)
The machine is not turned ON.
● The (Power) indicator does not light if the machine is not turned ON. Turn it ON. If the machine does
not respond when you press the power switch, check to make sure that the power cord is connected
correctly and then try again to turn the power ON.
Turning the Power ON(P. 26)
Communication is restricted by a firewall.
● Ask the system manager of the machine about the problem.
Restricting Communication by Using Firewalls(P. 140)
● If the machine cannot be accessed because of incorrect settings, use the reset button to initialize the
settings.
Initializing Settings by Using the Reset Button(P. 267)
Non-Canon Cartridge May Be in Use
● Even when this message is displayed, you can continue printing by clicking
quality may deteriorate. Doing so may also result in damage to the machine.
Now in Firmware Update Mode
The machine is in firmware update mode.
● The machine cannot print as it is entering firmware update mode. Print again after the firmware has been
updated or after canceling firmware update mode.
● Firmware update mode can be canceled before firmware is updated. Click the Printer Status Window's
[Options] menu
Troubleshooting
[Utility] [Enter/Cancel Firmware Update Mode]
221
to cancel the print job.
[OK].
, though the print