Table of Contents
Advertisement
Management Port
The MGMT (management) port can be used to connect the BitStorm 4800 to a
network management system using a 10BaseT or 100BaseT LAN. The MGMT
port is isolated and no user data is accessible over it.
Either a straight-through or a crossover cable can be used. The wiring is
automatically detected and, if necessary, compensated for.
Procedure
To use the MGMT port:
4821-A2-GN20-00
1. Connect a modular 8-pin cable to the MGMT port.
2. If the BitStorm 4800 is in a rack, fasten the cable to a rail with a cable tie.
3. Connect the other end of the cable to your Ethernet hub or to a network
interface card in a PC.
April 2002
Hub Device
02-17085
2. Cabling
2-9
Advertisement
Table of Contents
