4821-A2-GN20-00
6. Install two wood screws (not provided) at the same height at least 760 mm
(30" ) above the floor and 453 mm (17.85") apart. Do not completely tighten
the screws. Leave them so their heads are about 6 mm (.25" ) from the wall.
453 mm (17.85 in)
7. Hang the unit from the wood screws to verify that the screws are properly
placed. The screws should freely slide into the top of the key slots in the
brackets.
8. Do not fasten the unit to the wall until after it is completely cabled and tested.
Proceed to
Installing the Management Module
April 2002
1. Installation
02-17147
on page 1-13.
1-11