Table of Contents
Advertisement
Grounding Lug
Procedure
To connect the unit to a ground:
4821-A2-GN20-00
1. Strip back the insulation approximately 8 mm (5/16" ) on 14 AWG (2.08 mm
copper ground wire.
2. Loosen the screw on the grounding lug located on the back panel next to the
power switch.
3. Insert the stripped end of the wire through the bottom of the grounding lug and
tighten the screw. Ensure that the screw makes contact with the stripped
portion of the wire.
4. Attach the ground wire to an earth ground.
To
Ground
April 2002
2 5 -4 8
O R T S
D S L P
R T S 1-
24
D S L P O
2. Cabling
2
)
02-17081
2-13
Advertisement
Table of Contents
