Cables Required - Paradyne bitstorm 4800 Installation Manual

1. Installation

Cables Required

Table 1-1
Table 1-1.
1-2
shows all the cables that may be required for your installation.
Cable Descriptions
Connector Name
DSL PORTS 1–24
DSL PORTS 25–48
DOWNLINK GigE (RJ45)
DOWNLINK GigE (SFP)
UPLINK GigE (RJ45)
UPLINK GigE (SFP)
MGMT
CONSOLE
(4800 and 4804
Management Modules)
MODEM
(4800 and 4804
Management Modules)
ALARM
(4800 and 4804
Management Modules)
V.35/X.21
(4804 Management
Module)
April 2002
Connector and Cable
50-pin RJ21X Telco-type
straight connector and
50-wire cable. Two cables
required for 48 ports.
8-position modular plug and
8-wire Category 5 or better
twisted pair cable.
Duplex modular plug and
fiber optic cable. Socket
requires a 1000BaseX SFP
transceiver, not supplied.
8-position modular plug and
8-wire Category 5 or better
twisted pair cable.
Duplex modular plug and
fiber optic cable. Socket
requires a 1000BaseX SFP
transceiver, not supplied.
8-position modular plug and
8-wire Category 5 or better
unshielded twisted pair
(UTP) cable.
DB9 plug connector and
shielded cable. The other
connector depends on the
serial port on your terminal
or PC, but normally is a DB9
socket.
DB9 socket connector and
shielded cable. The other
connector depends on your
modem, but normally is a
DB25 plug.
8-position modular plug and
8-wire cable.
DB25 socket with V.35,
EIA-530-A, or X.21 adapter
or adapter cable.
For Connecting . . .
Up to 24 DSL ports to Main
Distribution Frame,
punchdown block, or splitters.
An upstream BitStorm 4800 to
a downstream BitStorm 4800,
or the BitStorm 4800 to an
adjunct server.
An upstream BitStorm 4800 to
a downstream BitStorm 4800,
or the BitStorm 4800 to an
adjunct server.
A downstream BitStorm 4800
to an upstream BitStorm 4800,
or the subtending or only
BitStorm 4800 to the Wide
Area Network (WAN) via an
Ethernet switch.
A downstream BitStorm 4800
to an upstream BitStorm 4800,
or the subtending or only
BitStorm 4800 to the WAN via
an Ethernet switch.
The BitStorm 4800 to a
Network Management System
over a Local Area Network
(LAN) employing 10BaseT or
100BaseT.
The Management Module to a
terminal or a PC with a
terminal emulation program.
The Management Module to
an external modem. The
connector can also be used to
connect a terminal or PC.
The Management Module to
an alarm system.
The subtending or only
BitStorm 4800 to the WAN via
a CSU or router.
4821-A2-GN20-00