1. Installation
Installing the BitStorm 4800 Into a Rack
Two types of mounting screws are provided. Use:
T
T
Procedure
To install the BitStorm 4800 into a rack:
1-8
#10-32 mounting screws for rails with threaded screw holes
#12-24 mounting screws and self-retaining nuts for rails with unthreaded
screw holes
1. Determine where in the rack you will mount the BitStorm 4800. If your rack
does not have threaded screw holes, slip self-retaining nuts onto the rails
where the BitStorm 4800 will be fastened.
April 2002
02-17070
4821-A2-GN20-00