Installing The Mounting Brackets For Wall Mounting - Paradyne bitstorm 4800 Installation Manual

Hide thumbs Also See for bitstorm 4800:
Table of Contents

Advertisement

1. Installation

Installing the Mounting Brackets for Wall Mounting

Wall mounting requires two wood screws suitable for the weight of the fully cabled
unit. These are not included. Use at a minimum 6 mm (.25" ) diameter screws in
19 mm (.75" ) plywood.
Procedure
To install the mounting brackets for wall mounting:
1-10
1. Identify the flat-head screws provided in the hardware kit. Two screws are
required for each bracket.
2. Orient the unit so that the bottom is facing you and the faceplate is at the top.
3. Locate the supplied Right Side mounting bracket and fasten it to the right side
of the unit.
4. Locate the supplied Left Side mounting bracket and fasten it to the left side of
the unit.
5. Tighten all screws firmly.
April 2002
02-17146
4821-A2-GN20-00

Advertisement

Table of Contents
loading

Table of Contents