Table of Contents
Advertisement
1. Installation
Mounting Brackets
The right-angle mounting brackets have a long side and a short side.
T
T
T
T
Both the supplied brackets and the optional ETSI brackets are marked LEFT SIDE
and RIGHT SIDE, with reference to the left and right sides of the BitStorm 4800
when viewed from the front.
For wall mounting, proceed to
on page 1-10.
For rack mounting, proceed to
page 1-8.
1-6
For 483 mm (19") racks, the long side of a supplied bracket is fastened to the
side of the unit.
For 584 mm (23" ) racks, the short side of a supplied bracket is fastened to the
side of the unit.
For wall mounting, the long side of a supplied bracket is fastened to the
bottom of the unit.
The optional ETSI brackets are always installed with the short side fastened to
the BitStorm 4800.
April 2002
Installing the Mounting Brackets for Wall Mounting
Installing the BitStorm 4800 Into a Rack
on
4821-A2-GN20-00
Advertisement
Table of Contents
