TRAP Port Number (Send)
Specifies a port number used to send TRAP to an SNMP manager.
Default
162
Value Range
1–65535
Maintenance Console Location
13.5 [11-4-2] SNMP—Manager
Programming Manual References
None
Feature Manual References
16.1.4 SNMP (Simple Network Management Protocol) System Monitor
TRAP Cold Start
Selects whether the PBX sends Cold Start TRAP to an SNMP manager or not.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
13.5 [11-4-2] SNMP—Manager
Programming Manual References
None
Feature Manual References
16.1.4 SNMP (Simple Network Management Protocol) System Monitor
TRAP Authentication Failure
Selects whether the PBX sends Authentication Failure TRAP to an SNMP manager or not.
Default
Enable
Value Range
Disable, Enable
Document Version 2009-12
13.5 [11-4-2] SNMP—Manager
PC Programming Manual
837