5-3-1] Voice Message-Disa System - Panasonic KX-NCP500 Pc Programming Manual

7.3 [5-3-1] Voice Message—DISA System
7.3 [5-3-1] Voice Message—DISA System
Direct Inward System Access (DISA) enables outside callers to access specific PBX features as if the caller
were using an SLT extension of the PBX.
For more information on DISA, see "4.1.8 DISA (Direct Inward System Access)" in the Feature Manual.
Option 1
DISA Security—DISA Security Mode
Selects the DISA security mode to prevent unauthorized access to the PBX. In CO Line or All Security mode,
the caller is required to override security by Walking COS or Verification Code Entry in order to enable the
restricted feature temporarily.
Default
Trunk
Value Range
None: Intercom calls, TIE line calls, and CO line calls can be made.
Trunk: Intercom calls and TIE line calls without PBX code can be made. TIE line calls with PBX code and CO
line calls are restricted.
All: All calls are restricted.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
19.1.1 Verification Code Entry
20.1.1 Walking COS
DISA Security—Remote Walking COS through DISA without PIN (Activation Key
Required)
Enables registered caller ID numbers to be automatically recognized as PBX extensions when calling through
DISA, and to use the Walking COS features without entering a PIN.
Default
Disable
Value Range
Disable, Enable (Get DISA)
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
708 PC Programming Manual Document Version 2009-12