Panasonic KX-NCP500 Pc Programming Manual page 418

4.18 [2-9] System Options
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
15.1.2 Ring Tone Pattern Selection
PT Operation—Automatic Answer for Call from CO after
Specifies the number of times a PT in Hands-free Answerback mode will ring before a conversation is
established automatically when it receives a call from a CO line.
Default
1 Ring
Value Range
No Ring, 1 Ring, 2 Rings, 3 Rings
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
8.1.1 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group key
Selects whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button is pressed
while having a conversation.
Default
Disconnect
Value Range
Disable (Disconnect), Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
6.5 [4-1-4] Wired Extension—Flexible Button
418 PC Programming Manual Document Version 2009-12