Panasonic KX-NCP500 Pc Programming Manual page 329

Recall—Disconnect after Recall
Specifies the length of time after an extension with a CO line call on hold receives a Hold Recall tone that the
held call is disconnected.
Default
30
Value Range
60 ´ n (n = 1–30) s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
3.1.4 Call Hold
Tone Length—Busy Tone / DND Tone
Specifies the length of time that a busy/DND tone is heard when a call is made to an extension in busy status
or DND mode. A reorder tone will be sent when this timer expires. (For a call through DISA, the call will be
disconnected when this timer expires.)
Default
10 s
Value Range
0 (continuous)–15 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
4.1.10 DND (Do Not Disturb)
Tone Length—Reorder Tone for PT Handset
Specifies the length of time that a reorder tone is heard when using a PT handset. The PT will return to idle
status when this timer expires.
Document Version 2009-12
4.5 [2-3] Timers & Counters
PC Programming Manual 329