Panasonic KX-NCP500 Pc Programming Manual page 258

3.31 [1-1] Slot—Port Property - PRI Port
Default
CO
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
3.31 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.31 [1-1] Slot—Port Property - PRI Port
Programming Manual References
3.32 [1-1] Slot—Port Property - PRI Port—Connection Command
Feature Manual References
None
Subscriber Number
Specifies the number used as the CLIP number.
258 PC Programming Manual Document Version 2009-12