Panasonic KX-NCP500 Pc Programming Manual page 693

Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
11.4 [9-4] NDSS Key Table
Feature Manual References
13.1.17 Private Network Features—NDSS (Network Direct Station Selection)
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Default
1
Value Range
1–8
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
4.6 [2-4] Week Table
Feature Manual References
17.1.5 Time Service
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Group CO, G-DN, SDN)
Specifies the ring tone type.
Default
1
Value Range
KX-DT300 series (except KX-DT321)/KX-T7600 series/IP-PT (except KX-NT265/KX-NT321): 1–30
KX-DT321/KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Document Version 2009-12
6.17 [4-3] DSS Console
PC Programming Manual 693